High-Performance Wire Drawing Lines for Copper & Aluminum
From 8mm Rod Breakdown to 0.05mm Fine Wire. We provide Individual Driven, Gear Driven, and Multi-wire drawing solutions with integrated continuous annealing.
Get A Quote
Why Wire Drawing Quality Matters?
✔ Perfect Surface Finish
Our advanced lubrication and cooling systems (immersed/spray) ensure the wire surface remains bright, smooth, and scratch-free. This is critical for downstream processes like enameling or high-voltage insulation.

✔ Maximum Speed & Uptime
With drawing speeds up to 2500 m/min and Quick Die Change (QDC) technology, our machines maximize your daily tonnage output while minimizing setup downtime.

✔ Consistent Elongation
Our online continuous annealers (DC/AC) automatically synchronize with drawing speed. This guarantees uniform softness (elongation) of the wire from start to stop, preventing breakage during stranding.
Rod Breakdown
Rod Breakdown
Successive drawing stages reduce rod to the target wire diameter.
Fine Wire Drawing
Fine Wire Drawing
Controlled drawing, lubrication and cooling support fine-wire surface and dimensional consistency.
Our Drawing Line Solutions

  • Comprehensive solutions for every stage of wire reduction.

Drawing Line

Single/Double Heads Individual...

Single/Double Heads Individual Driven Type Rod Breakdown Machine

This machine is used to draw 1.2-4.5mm copper wires. Tandem cabinet combined mechanism, each wire capstan driven by independent motor. Fully-immersed drawing basin take good wire cooling effect.

Model / Data Coverage
DR450-9, DR450-11, DR450-13, DR450-15, DR450-9/2, DR450-11/2, DR450-13/2, DR450-15/2
View More
WHAT ARE YOU LOOKING FOR?
*
This field is required
Total quantity you need
*
This field is required
*
This field is required
Email format error
Due to email instability, you might miss our correspondence. Please provide your phone number for alternative contact.
This field is required
Telephone information is wrong!
Send Message
Gear Driver Type Copper Rod Br...

Gear Driver Type Copper Rod Breakdown Machine

This machine is used to draw 1.2~3.5mm copper wires. The drawing blocks are mounted in one row. The constant-speed wheel and the other 12 drawing block are driven by two motors respectively. Such design makes easy operation and change dies quickly.

Model / Data Coverage
DR400-7, DR450-9, DR450-11, DR450-13, DR450-15
View More
WHAT ARE YOU LOOKING FOR?
*
This field is required
Total quantity you need
*
This field is required
*
This field is required
Email format error
Due to email instability, you might miss our correspondence. Please provide your phone number for alternative contact.
This field is required
Telephone information is wrong!
Send Message
Gear Driver Type Aluminum and ...

Gear Driver Type Aluminum and Alloy Rod Breakdown Machine

This machine is used to draw 1.7-4.0mm aluminum wires. The drawing blocks are mounted in one row. The constant-speed wheel and the other 8 drawing block are driven by two motors respectively. Such design makes easy operation and change dies quickly.

Model / Data Coverage
CT450-9, CT450-11, CT450-13, CT450-15
View More
WHAT ARE YOU LOOKING FOR?
*
This field is required
Total quantity you need
*
This field is required
*
This field is required
Email format error
Due to email instability, you might miss our correspondence. Please provide your phone number for alternative contact.
This field is required
Telephone information is wrong!
Send Message
Intermediate Wire Drawing Mach...

Intermediate Wire Drawing Machine

The machine is for drawing max 3.5mm copper wire to be 0.4-1.6mm wire. This machine combines high-speed drawing, continuous annealing, and automatic spooling into one efficient line.

Model / Data Coverage
DR-9DT, DR-13DT, DR-17DT, DR-21DT
View More
WHAT ARE YOU LOOKING FOR?
*
This field is required
Total quantity you need
*
This field is required
*
This field is required
Email format error
Due to email instability, you might miss our correspondence. Please provide your phone number for alternative contact.
This field is required
Telephone information is wrong!
Send Message
Intermediate Fine Wire Drawing...

Intermediate Fine Wire Drawing Line

The machine is for drawing copper wire to be intermediate fine wire.

Model / Data Coverage
DR-14D, DR-18D, DR-20D, DR-22D
View More
WHAT ARE YOU LOOKING FOR?
*
This field is required
Total quantity you need
*
This field is required
*
This field is required
Email format error
Due to email instability, you might miss our correspondence. Please provide your phone number for alternative contact.
This field is required
Telephone information is wrong!
Send Message
Fine Wire Drawing Machine

Fine Wire Drawing Machine

This machine is used to draw 0.1-0.4mm copper wires.

Model / Data Coverage
DR-22D, DR-24D, DR-26D, DR-22DH
View More
WHAT ARE YOU LOOKING FOR?
*
This field is required
Total quantity you need
*
This field is required
*
This field is required
Email format error
Due to email instability, you might miss our correspondence. Please provide your phone number for alternative contact.
This field is required
Telephone information is wrong!
Send Message
Multi Wire Copper Drawing Mach...

Multi Wire Copper Drawing Machine

The machine is for drawing multi copper wires with perfectly uniform elongation, making it the ideal preparation step for high-speed bunching and stranding processes.

Model / Data Coverage
CT120-22/16, CT120-27/24, CT100-27/16, CT100-22/16, CT220-21/4, CT180-25/4
View More
WHAT ARE YOU LOOKING FOR?
*
This field is required
Total quantity you need
*
This field is required
*
This field is required
Email format error
Due to email instability, you might miss our correspondence. Please provide your phone number for alternative contact.
This field is required
Telephone information is wrong!
Send Message
Electroplating Tin Line

Electroplating Tin Line

The machine is a high speed and high quality equipment which is mainly used for plating tin on the bare copper conductor. It mainly includes mechanical, electrical, and other auxiliary system and environment protection equipment such as waste air scrubber and vacuum evaporator.

Model / Data Coverage
CT-300-3000A, CT-300-4000A, CT-400-6500A, CT-400-13000A
View More
WHAT ARE YOU LOOKING FOR?
*
This field is required
Total quantity you need
*
This field is required
*
This field is required
Email format error
Due to email instability, you might miss our correspondence. Please provide your phone number for alternative contact.
This field is required
Telephone information is wrong!
Send Message
View More
The Cabletec Technical Advantage
Individual Servo Drive Technology

Individual Servo Drive Technology

Our advanced RBD machines use independent motors for each drum. This eliminates gear friction losses, reduces noise, and allows for instant die schedule changes via the touchscreen.
High-Efficiency Annealing

High-Efficiency Annealing

We utilize 3-section annealing (Pre-heating, Annealing, Drying) with DC current control. This ensures stable resistance and elongation even during speed ramps.
Precision Transmission

Precision Transmission

For fine wire, we use high-strength timing belts to eliminate vibration marks. For heavy rod breakdown, we use precision-ground helical gears for massive torque transmission.
Advanced Lubrication

Advanced Lubrication

From full immersion to high-pressure spray, our lubrication systems keep dies cool and clean, extending die life and ensuring a mirror-like wire finish.
The Cabletec Technical Advantage

Ready to Upgrade Your Drawing Capacity?

Tell us your inlet/outlet wire diameter and target daily output. We will engineer the optimal drawing line for you.
Contact Us Today!
Application Scenarios
Power Cable Conductors

Power Cable Conductors

Copper and aluminum wire drawn to the diameter required for subsequent stranding and power cable production.
Automotive & Electronic Wire

Automotive & Electronic Wire

Fine copper wire prepared for automotive harnesses, electronic wire and other compact conductor applications.
Magnet Wire Feedstock

Magnet Wire Feedstock

Clean, dimensionally consistent copper wire prepared for downstream enameling and winding-wire production.
Solar PV Cable Conductors

Solar PV Cable Conductors

Fine stranded copper conductors prepared for flexible photovoltaic cable constructions.
img of What Our Clients Say
CLIENT FEEDBACK
What Our Clients Say
Replacing our old gear machines with Cabletec's Individual Driven RBD was a great move. The factory is much quieter, and we see noticeable electricity savings.
The 24-wire drawing line is incredibly efficient. It feeds our high-speed bunchers perfectly without any tension issues. A true mass production solution.
Production Manager
Poland
Factory Owner
Vietnam
Our Partner
Our Partner
Our Partner
Our Partner
Our Partner
Our Partner
Our Partner
Our Partner
Our Partner
Our Partner
Our Partner
Our Partner
Get In Touch

Your One-Stop Solution Provider for Wire Drawing & Annealing Equipment

If you have any questions about drawing dies, machine speed, or annealing configurations, please feel free to contact us. Our team will contact you within 12 hours!