Our engineer is debugging the rigid frame stranding machine in Fiji
1.Application:
This equipment is mainly used for stranding and tightening sector conductor, round conductor, and etc.
2.Technical data:
2.1 Bobbin size in the frame PND630(need provide the bobbin drawing)
2.2 Inlet wire diameter Cu:1.5~5.0mm Al:1.8~5.0mm
2.3 Twist outer diameter φ45mm
2.4 Max speed of skein 143rpm
2.5 Lay length 56-1550mm
2.6 Taping speed 166-380rpm
2.7 Taping pitch 21-355mm
2.8 Max line speed 8.0~59m/min
2.9 Pay-off bobbin PN800~PN1600
2.10 Take-up bobbin PN1250~PN2500
2.11 Main motor 90KW(AC)
2.12 Central height 1000mm
3.Composition of the machine
3.1 φ1600mm column type pay-off 1set
3.2 Guide wheel frame 1set
3.3 24 bobbins cage 1set
3.4 Meter counter 1set
3.5 Main transmission device(including motor assembly) 1set
3.6 400/4 Taping device 1set
3.7 2000mm capstan 1set
Including:(1) 36-step gear box
(2) φ2000mm Double-wheel capstan
3.8 Electrical control system 1set
3.9 φ1250~φ2500 movable portal type take-up with traverse 1set
3.10 Safety fence 1 set
Mavis Cai
E-mail:mavis@chinacabletec.com
Mobile/Wechat/WhatsApp: +86 13815079319
Changzhou Cabletec Machinery Co.,Ltd.
www.chinacabletec.com